Culver City Stout
|Pale 6 lbs.
or Dark 6lbs.
|Black Barley 4 oz
Roasted Barley 4 oz
Crystal 120L 4 oz
Crystal 10 4 oz (if using the Dark)
| #1 Challenger (7.4%) 1.5 oz 60 min
|65-75 degrees F
|Wyeast 1084 Irish Ale
or Wyeast 1028 London Ale
or Wyeast 1056 American Ale
An Irish style dry stout. Roasted, unmalted barley gives this beer
its unique taste. Celebrate St. Patricks day every day with this delicious
- In a small pot bring 3 or 4 quarts of water to around 150 degrees
(bubbles start to form on the bottom.)
- Remove from the heat and stir in the specialty grains, cover and
steep for 20-30 minutes.
- Meanwhile, fill the large brew pot half full with water and apply
- When bubbles start to rise from the large pot, turn off the heat
and stir in the extract.
- After the grains have steeped for 20-30 minutes, pour them through
a strainer into the large brew pot.
- Add some hot water to the small pot and rinse the grains in the strainer.
- Bring what is now called ‘wort’ to a full, roiling boil.
Watch for boilovers!
- Once the foaming stops, add the contents of the first hop package.
- Sanitize your fermenter, strainer, airlock & stopper.
- Maintain the boil for one hour, adding hops as per recipe.
- When the boil is done, cool the pot in a sink until sides are cool
to the touch.
- Pour the wort into your sanitized fermenter, add pre-chilled water
to bring it up to 5 gallons at about 75 degrees and pitch the yeast.
- Ferment in the temperature range recommended above.